Siress
07-19-2010, 02:28 AM
Once again, I've modeled the entire gun in Solidworks. The frame, however, was outside the abilities of my very complicated measuring devices ($20 calipers [they've passed the +/- .0005" cert twice, though!]), so it's merely by sight only.
http://www.mcarterbrown.com/gallery/data/500/GB30.JPG
For those that don't know, a Gargoyle is the flagship marker from Remember The Ronin (remembertheronin.com). It's a nelson variant that shares all operating parts with the Phantom. It's a work of art, but still holds function over form. The internals are easily removed from the gun via the breech section lifting off after the feed tube is unscrewed from the body.
Note that the feed tube threads are the same as a cocker barrel, 11/16 x 20, IIRC.
For now, the only location of the files is this link at Megaupload: http://www.megaupload.com/?d=EKW0GM7N
http://www.mcarterbrown.com/gallery/data/500/GB30.JPG
For those that don't know, a Gargoyle is the flagship marker from Remember The Ronin (remembertheronin.com). It's a nelson variant that shares all operating parts with the Phantom. It's a work of art, but still holds function over form. The internals are easily removed from the gun via the breech section lifting off after the feed tube is unscrewed from the body.
Note that the feed tube threads are the same as a cocker barrel, 11/16 x 20, IIRC.
For now, the only location of the files is this link at Megaupload: http://www.megaupload.com/?d=EKW0GM7N